Sequential & Combintion Timer TK-415

PROGRAMMABLE SEQUENTIAL AND COMBINATION TIMER TK-415

Product Details:

Voltage Type	AC
Voltage (V)	85 – 270 (50/60 Hz)
Number of Channels	15 Channel
Application	Process control, Traffic Light operation, Dust collectors, Conveyor/ Hopper automation
Current (Amps)	10A
Brand	NOVATEK ELECTRO
Contact Form	15 x SPDT (potential free NO contacts)
Type	Selectable Sequential & Combination modes, PC programming software

Sequential and Combination Timer with RS-232 communication

Basic functions:

15 channel (potential free relay outputs)
Microprocessor controlled
Selectable sequential and combination modes in one timer
Simple change-over between sequential and combination timer
7-segment LED indications
Cascade connection of several devices for extended total number of channels
Memorization of program after switching off and program operation restart from breakage
Inputs for timer start and pause control
Fast resetting
Copy of settings
Selectable time range SEC:MSEC, MIN:SEC, HRS:MIN
RS-232 communication for programming and DCS integration (free PC software provided)
Program can be executed only one time or/and cyclic operation possible

Timer programming:

Sequential Timer Programming:

Fix switch RUN/PROG in position PROG
For sequential timer selection fix switch SEQ/COMB in position SEQ. Supply power to inputs A1 and A2
Using the button RELAY select the channel 1
Using the button DLY/ON select time DLY for time setting, during which the contacts of channel relay will be open
Press RANGE for selection of necessary time range
Using arrow button to set the necessary time
Repeat steps 4 through 6 for status time setting ON, during which the contacts of channel relay will be closed
Repeat steps 3 through 7 for setting of other channels

Combination Timer Programming:

Fix switch RUN/PROG in position PROG
For selection of combination timer fix switch SEQ/COMB in position COMB. Energize the inputs A1 and A2
Using button RELAY select channel 1
Using button COMBINATION select combination 1
Using button DLY/ON select time DLY for time setting, during which the contacts of channel relay will be open
Press RANGE for selection of necessary time range
Using arrow buttons set the necessary time
Repeat steps 5 through 7 for set of status ON, during which contacts of channel relay will be closed
Repeat steps 4 through 8 for setting the other channel combinations
Repeat steps 3 through 9 for setting of other channels and their combinations

Additional Information:

Technical Brief:

Supply voltage, V	from 85 to 270 AC/DC
Frequency range, Hz	47-63
Power consumption, VA	8
Time setting range	from 0.1s to 99 hr 59 min
Commutation accuracy	±0.1% + 20ms
Number of channels	15
Number of combinations per channel (ON/OFF)	8
Operating temperature range, °C	from -25 through +55
Storage temperature, °С	from -35 through +60
Humidity (non condensing)	85% / 40°С
Insulation resistance	>100 МOhm / 500V DC
Dimensions, mm	85.8 х 156.2 х 56.8
Weight, kg	0.5
Indication of load relay	Yes
Protection level	ІР20
Climatic resistance version	NF3.1
Permissible contamination level	\|\|
Overvoltage category	\|\|
Nominal voltage of isolation, V	450
Nominal impulse withstanding voltage, kV	2,5
Cross section of wires of connection terminals, mm²	0,5-2,5
Maximal tightening torque of terminals external screws, N*m	0,4
Data memory, years, minimum	10
Channel contacts type	normally open contact (NO)
Mounting	onto standard 35 mm DIN-rail
Mounting position	any

Characteristics of output channels
сos ф	Maximum current at U~250V	Maximum capacity	Maximum current at Uconst=24V
1.0	10 A	2500 VA	10 A
0.4	4 A	1000 VA
Commutation resource of output contacts: – mechanical resource – electric resource 10A 250V AC, times, minimum – electric resource 10A 24V DC, times, minimum – electric resource 4A 250V AC (сos j = 0,4 ), times, minimum			10⁷ 100 000 30 000 100 000
Signal «Start»			Contact Closure S1 and S2 minimum at 150 milliseconds